09.12.01.01-1

.01-1 Incorporation by Reference.

A. The following documents are incorporated by reference to the extent that they are referenced in this chapter:

(1) ASME 2019 Boiler and Pressure Vessel Code, an International Code; and

(2) National Board Inspection Code — NBIC, 2019 Edition.

B. The following documents are incorporated by reference in their entirety:

(1) ASME B31.1 — 2018 Edition, Power Piping (American Society of Mechanical Engineers);

(2) ASME B31.3 — 2018 Edition, Process Piping (American Society of Mechanical Engineers);

(3) ASME CSD-1 — 2018 Edition, Controls and Safety Devices for Automatically Fired Boilers (American Society of Mechanical Engineers) as amended in §C of this regulation; and

(4) NFPA 85, Boiler and Combustion Systems Hazards Code — 2019 Edition (National Fire Protection Association).

C. Controls and Safety Devices for Automatically Fired Boilers (CSD-1) (American Society of Mechanical Engineers).

(1) The requirements of ASME CSD-1 in effect at the time a boiler is installed apply to:

(a) Power boilers regardless of fuel input;

(b) Other boilers with a fuel input of greater than 2,500,000 Btu per hour and less than 12,500,000 Btu per hour; and

(c) Other boilers with a fuel input of 2,500,000 Btu per hour or less, except that Section CF of CSD-1 does not apply to these boilers.

(2) The following are exempt from the requirements of ASME CSD-1:

(a) Water heaters stamped either H or HLW and used as potable water heaters, if the water temperature is less than 210F and the water pressure is less than 160 PSIG;

(b) Miniature boilers, except as required in Regulation .37 of this chapter;

(c) Kitchen equipment boilers, except as required in Regulation .38 of this chapter; and

(d) Historical boilers.